How to Check Capacity of Your Power Bank
If you have an original real capacity 10,000 mAh powerbank but still you can charge your 1500mah phone (like iphone5) about 6 times right? Well, here is where the confusion begins. Where is It’s claimed real 10,000mAh real power???
What the advertised capacity really tells you.
The rated capacity is what is actually inside the power bank, the physical battery.
This power bank has 4 (quantity) 3.7V 2,500mAh batteries, together that equals 10,000mAh and this is correct.
But USB is 5V! All Mobiles Charge at 5V
Inside power banks are 3.7V batteries but the USB standard is 5V. Between the battery and the USB socket is a conversion circuit and this changes the 3.7 V into USB friendly 5V. When converting into a higher voltage you must also convert the mAh into the new voltage.
How to calculate theoretical USB output capacity
A simple equation can be used to convert the 3.7V into 5V.
ACTUAL 5V mAh = 3.7 X Advertised Capacity / 5
For a 10,000mAh powerbank – 3.7 X 10,000 / 5 = 7,400 mAh
So a 3.7V 10,000 mAh powerbank really only supplies 7,400 mAh at the 5V USB connection. So straight out of the box is a 23% reduction in the stated mAh. This is not the actual experienced level as there is also conversion loss.
What is conversion loss?
As you use your powerbank the circuit inside that converts 3.7V to 5V USB uses some energy and also creates heat. During this conversion you lose some extra mAh. There is a wide range in conversion efficiency and most brands don’t state the losses, Xiaomi has prized themselves on their conversion efficiency chips which are up to 98% efficient, meaning you only loose 2% off your battery power in the conversion. Some others can consume as much as 10% during conversion.
Why don’t they just state the actual output?
They don’t need to as technically that is what’s inside the box and most people have no idea. By not giving the actual 5V output brands can reap these benefits;
- Manufactures can have a higher number of mAh for their powerbank and sound more powerful.
- It avoids the talk or testing of conversion loss and brands with low efficiency conversion chips can still market them in the same league as other efficient brands.
Some manufacturers will state in the manual or in small print on the device but most will not state anything other than the 3.7V mAh. As a general rule I would recommend taking 25% – 30% off the advertised capacity straight away and then you have a more realistic indication of performance.
It is a very gray area and not common knowledge but I hope this has shed a bit of light on how powerbanks are advertised and busted the classic assumption that dividing the rated capacity by your phone battery capacity is an accurate measurement of actual number of recharges, in reality, it is far from it.
You are now a powerbank expert and next time you are on the prowl for a new one have a look through our range.