ELM327 OBD2 WIFI Auto Diagnostic Scanning Tool (1)

ELM327 OBD2 WIFI Auto Diagnostic Scanning Tool

1 Review(s)Add Your Review

Availability: Out of stock


Quick Overview

ELM327 OBD2 WIFI Auto Diagnostic Scanning Tool

Out of stock

Compatible with IOS and Android Devices

  • OBD Scanner for all supported vehicle
  • Remove check light/engine light
  • Diagnose fault in vehicle
  • Supports IOS and Android apps via WIFI
  • Fast processing speed then Bluetooth version
  • Save money by purchasing ELM327 instead of expensive scanners

ELM327 – WIFI Car Diagnostic Interface Tool for IOS & Android

Mini WiFi ELM 327 can be used on IOS and Android syetem smart phone PC and so on…Mini WiFi ELM 327 auto checker is able to detect and interpret these protocols automatically.It also provides support for high speed communications and a low power sleep mode.It uses AT commands to communicate with a host device(PC, notebook, IOS, Smart phone and so on). Thereare plenty of software package available, which are fully compatible with WI-FI OBD AUTO Checker. Some ofthem have pretty useful features, such as engine runnign parameters monitoring, DTC reading and clearing,MPG meter, etc.You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and are very well explained.Elder OBD compatible vehicles has a sticker indicates that the vehicle is OBD compatible. Model year 1996 andNewer vehicles are compliant by default, and will not have this sticker.Mini WiFi ELM327 Supports Multi Brand CarsIt works on OBD2 vehicles ,but it is impossible for us to test it on all kinds cars. we are not sure whether it  could comply with your cars or not. If you have not used the product before ,you could have a try.

1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL (“Check Engine” light)
3.Display current sensor data, including:
4.Engine RPM
5.Calculated Load Value
6.Coolant Temperature
7.Fuel System Status
8.Vehicle Speed
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
12.Timing Advance
13.Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17.Fuel System status
18.Fuel Pressure
19.Many others…
For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
OBD SCAN is the newly developed wireless scan tool. It supports all OBD-II protocols
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
A.SAE J1939 CAN(29bit ID,250*Kbaud)
B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)
*default settings(user adjustable)
1.Works with all OBD-II compliant vehicles
2.WIFI enabled devices IOS and Android
Package list:
Elm327 main unit *1


1 review for ELM327 OBD2 WIFI Auto Diagnostic Scanning Tool

  1. admin
    5 out of 5



Only logged in customers who have purchased this product may leave a review.